|
|
Tsurumi LB General Dewatering Pumps - Powerful submersible pumps built with durable
materials in an easy handling design. Top discharge provides maximum motor cooling
efficiency allowing continuous duty operation at low water levels and extended dry-run
capability - Models include:
LB 480
LB3 750
LB 480A
|
|
|
Tsurumi HS Trash Pumps - Durable trash pumps in two sizes - a 1HP 3 inch discharge
and a 1/2HP 2 inch discharge. Both designed to pump sand, solids and debris with
minimal wear and clogging. Features include a built-in shaft mounted agitator, urethane
impeller, double inside mechanical seal, and V-ring seal protectors
Models include:
HS2.4S 62
HS3.75S 61
|
|
|
Tsurumi NK2 Heavy Duty High Head Pump - A heavy duty pump capable of handling
abrasive materials with minimal wear. Features include - semi-vortex impeller, synthetic
rubber wear plates, double inside mechanical seal, oil lifter and V-ring seal protector.
Optional Accessories include: TS-303 Float Switch for automatic operation, Sand Kit to
suspend solids and prevent clogging and 2 inch NPT coupling
|
|
|
Tsurumi LSR Ground Level Drainage Pump - Pump holds suction for drainage to 0.2 inch
water level! LSR2.4S features include: Urethane, semi-vortex impeller and wear plates for
maximum durability and maintaining pump performance. Double inside Mechanical Seal
with SiC faces provides the longest operation life. Oil Lifter provides lubrication of the seal
faces. V-Ring Seal Protector protects mechanical seal from abrasive particles.
|
|
|
Tsurumi LSC Floor-Level Residue Pump - Original residue dewatering pump; able to
pump down to the floor. Even the smallest puddle can be pumped dry. Complete
drainage of flat surfaces where a sump is not available.
Features include:
Prime pump through discharge outlet for startup at any water level
Internal check valve holds prime and prohibits back flow through pump when stopped
Urethane, Semi Vortex impeller and wear plates for maximum durability and maintaining
pump performance
|
|
|
Tsurumi KTZ Three Phase Dewatering Pumps - Designed to withstand the most
demanding conditions found in the construction, aggregate and mining markets - Easily
converts between high head and high volume performance with a simple change of
impeller and wear plate. Wide range of sizes for any jobsite. Features include:
Circle Thermal Motor Protector protects against overheating and run-dry
Anti-Wicking Block prevents water incursion due to capillary wicking
Lip Seal Protector
High Chrome Iron Semi-Open Impeller resists wear by abrasive particles
|
|
|
Tsurumi LH and LHW Three Phase Slimline Pumps - Tsurumi introduces an ultra-slim
pump with very high head and still fits inside an 8 inch pipe - Ideal for deep-well
pre-dewatering. LH/LHW features include:
Circle Thermal Motor Protector protects against overheating and run-dry
Anti-Wicking Block prevents water incursion due to capillary wicking, should the cable be
damaged or the end submerged
Double Inside Mechanical Seal with Silicon Carbide Faces and a ductile iron casing
|
