Dowd Construction Supply Co.
Please Call Us - 1-573-785-3677


We Appreciate Your Business!
Husqvarna K650
Cut n Break
Gas Powered Concrete Saw
Husqvarna K3000 Electric
Cut-n-Break Saw
Well suited for indoor use and smaller jobs
where you want to avoid overcutting at corners

Husqvarna K3000 Electric CnB
Husqvarna K650 Cut n Break Cutoff Saw


The Husqvarna K650 Cut n Break is a twin blade concrete
saw with a unique method for cutting deep, up to 16", at an
extremely low tooling cost.  The K650 Cut n Break has a
wide range of applications.  It is ideal for use on window
and door openings where you do not want overcutting at
the corners.  It is also very good for cutting pipes in
trenches, sawing grooves for cabling and expansion
joints, and for crack renovation.

  • Efficient power cutter with a new, easy to use
    method that cuts up to 16" deep
  • Specially developed, twin 9" blades provide high
    cutting speed and power
  • Sealed transmission reduces wear and the risk of
    slippage
  • Easy View fuel indicator shows fuel level in the tank
71cc, 4.8HP, 16" cutting depth, 22.3 lbs

Husqvarna K650 Cut n Break comes complete with a wet
cutting kit, one set of two EL20CnB diamond blades and
breaking tool

The Husqvarna K650 Cut n Break is supplied assembled.  
It also comes with a specially developed, patented twin
diamond blades and a breaking tool.  The Husqvarna
K650 Cut n Break is for wet cutting only and great for
cutting when burying signal cables.


The Husqvarna K3000 Electric Cut n Break features the
Elguard advanced electronic overload protection system
and Electronic Softstart

Please call for help with replacement blades for
K650 Cut and Break and K3000 Cut-n-Break
The Husqvarna Cut n Break method
allows you to cut in stages through walls
up to 16" thick.

To place an order, or if you have
questions about the
Husqvarna K650, K760 or the
K3000 Electric cut n break,
please call 1-573-785-3677

We sell replacement blades, belts and air filters for
the Husqvarna K650 and K3000 Cut n Break Saws
Make 16" deep cuts in concrete with the Husqvarna K650 cut n break and K3000 electric cut n break!
The Husqvarna K3000 Electric Cut n Break is an
efficient electric cutoff saw with a convenient
method for cutting up to 16" deep.
The K3000 Cut n Break is an excellent choice for
flush cutting, i.e. cutting tight against walls and
floors.
The Husqvarna K3000 Electric Cut n Break is well suited for indoor use and smaller jobs where you want
to avoid overcutting at the corners.
Ideal for cutting pipes in trenches, grooves for cabling, expansion joints and for crack renovation.
Please call for help with parts for the Husqvarna K650 or K3000 Cut n Break saw - 573-785-3677
Cut n Break Blade Sets



EL10CnB is developed for the Husqvarna K3000 Cut n Break.  This blade is for cutting cured
concrete with hard to medium-hard aggregate and has a U-shaped segment design which
improves cooling and slurry transportation, for better blade speed

EL20CnB blade cuts hard material such as river rock, granite, heavily reinforced concrete, mica
precast panels, marble, quartz, trap rock, flint rock, and concrete over 6,000 psi tensile strength

EL45CnB is a general purpose blade that will cut a wide range of material including concrete
less than 6,000 psi tensile strength, lightly reinforced concrete and concrete pipe.  Provides
good cutting speed and good blade life for all general concrete with the K650 cut n break

All Husqvarna Cut n Break blade sets have a depth of 16", for wet cutting only
The total segment height for these sets is .295" diamond depth

We sell spare parts for Husqvarna K650 cut n break saws including;
air filters, spark plugs, carburetors, carb kits, blade guards, belts,
ignition coils, recoil starters, pistons, piston rings and complete
cylinder assemblies.  Give us a call, and we'll be glad to help you find
the parts you need for your Husqvarna / Partner concrete saw.
We stock filters, belts and diamond blades for Husqvarna Cut and
Break concrete saws.
We stock K650, K760 and K3000 cut n break blades, parts,
and accessories
See the K650 Cut n Break in action
We stock
Husqvarna Partner
K650, K700, K750
and K960
crankshafts,
cylinder and piston
kits, and
carburetors.  Other
parts include;
K650, K750 and
K960 starters, air
filters, pistons,
carburetors and
ignition coils.

We stock a wide
range of
Husqvarna
accessories and
safety supplies like
hardhats,
faceshields,
gloves, gear bags,
and safety glasses.

We keep a variety
of concrete cutting
diamond blades
for Partner K650
Saws.
The New Husqvarna K760 Cut n Break Saw