|
 |
|
|
|
Agatec MR360R Magnetic
Laser Receiver / Laser Detector
|
|
|
|
 |
|
|
|
Agatec MD360R
Remote Display
|
|
|
|
Agatec MR360R Magnetic Laser Receiver
and Remote
The Agatec MR360R laser detector offers accurate grade
information for all visual machine control applications.
Large 360 degree detection windows pick up any rotating
laser, from any angle.
Built in vertical indicator monitors angle of the stick,
signaling if it's plumb or under or over-extended. The
MR360 receiver has plumb LED indicator; remote display
has direction arrows for plumbing up the dipper stick.
Saves money by reducing over or under cuts.
MR360 Features:
- LED indicators show position of cutting edge in
relation to the laser reference beam. Seven display
channels (indicators) in coarse mode; nine
channels in fine mode.
- Memory stores last signal received. Arrows
indicate which way to move the cutting edge to
reach the reference plane
- Includes magnet mount, charger, case
- MR360R Laser Receiver can be purchased without
remote, but for optimal use of vertical indicator, the
remote with direction arrows is required.
Mounts for the MR360
To mount the MR360R with clamps, weld a bracket to your
machine, or purchase the optional post or excavator
mount.
Wireless remote display
- See receiver's channels, plumb indicator arrows,
plus ditch and bucket in the same view
- Latest RF technology offers bidirectional
communication, allowing you to change receiver
settings without leaving the cab
- Includes suction cup for the cab windshield and 12-
24V power cord with accessory plug
|
